How to use pulp molding tableware machine

Pulp molding tableware machine is an environmentally friendly production equipment used to manufacture tableware made of pulp raw materials, such as paper plates, paper bowls, paper cups, etc. Its use is relatively simple, but requires following correct procedures and safe practices. Here are the detailed steps for using a pulp molding tableware machine:

1. Preparation:

1). Check the equipment: Make sure the machine is in good condition and all components are installed correctly and there are no abnormalities.

2). Prepare pulp raw materials: Use an appropriate amount of pulp raw materials, which can be recyclable materials such as waste paper and waste cardboard.

3). Cleaning and disinfection: Make sure the work area is clean and tidy, and clean and disinfect equipment to ensure product hygiene.

2. Operation steps:

1). Start the equipment: Connect the pulp molding tableware machine to the power supply and start the equipment, wait for the equipment to preheat to the appropriate temperature.

2). Adjust the mold: Replace or adjust the corresponding mold according to the type of tableware that needs to be produced.

3). Add pulp raw materials: Pour the prepared pulp raw materials into the hopper of the equipment.

4). Start molding: Start the equipment, and the pulp raw materials are molded into tableware of corresponding shapes through the molding part of the machine.

5). Drying and forming: The formed tableware will be dried through the drying part of the equipment to ensure that the product has a good texture after forming.

6). Collection and packaging: After completion, the finished tableware is taken out of the equipment and packed or boxed.

3. Safety precautions:

1). Pay attention to the operating status of the equipment: When operating the equipment, ensure that hands and clothing are kept away from the moving parts to avoid accidental injuries.

2). Avoid excessive feeding: Control the feeding amount to avoid excessive pulp raw materials causing equipment blockage or other failures.

3). Regular maintenance: Perform regular maintenance on the equipment, clean each component, and check the status of the equipment to ensure normal operation.

4). Comply with safety regulations: Operators should wear appropriate protective equipment, such as gloves and safety glasses, to protect their own safety.

4. Cleaning and maintenance:

1). Cleaning equipment: After each use, clean the remaining pulp of the equipment in time to avoid affecting the next production.

2). Maintenance: Perform regular maintenance and inspections on the equipment to ensure the normal working condition of each component of the machine.

The operation of the pulp molded tableware machine is relatively straightforward, but careful operation is still required during use to ensure product quality and operational safety. Correct operating procedures and safety measures are essential for the normal operation of the equipment and the production of high-quality tableware.